Operation
11
Follow this procedure:
1. Aim the camera toward an object of interest.
2. Do the following:
• To freeze the image, pull and hold the trigger.
• To return to the live image, release the trigger.
11.8 Changing the temperature unit
The camera displays temperatures in ℃ or ℉. You change the temperature unit by push-
ing a button behind the pin hole.
Note It is also possible to change the temperature unit using FLIR Tools. See section
11.10.2 The User interface tab, page 27.
Follow this procedure:
1. Turn on the camera.
2. Use a paper clip or a similar small item to push the button behind the pin hole.
11.9 Connecting the camera to a computer
11.9.1 General
You can connect the camera to a computer, using the USB cable.
Once connected, you can do the following:
• Change the camera settings using the FLIR Tools software. See section 11.10 Chang-
ing settings in FLIR Tools, page 26.
• Applicable to FLIR K53: Move the images and video clips from the camera’s archive to
the computer.
• Applicable to FLIR K53: Import the images into the FLIR Tools software.
#T810170; r. AE/41948/41948; en-US
24
To Next Page
Loading...
