EasyManua.ls Logo

FLIR K33 - Decontamination and Disinfection Requirements

FLIR K33
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning, decontamination and disinfection
16
CAUTION
Be careful when you clean the infrared lens. The lens has a delicate anti-reflective coating.
Do not clean the infrared lens too vigorously. This can damage the anti-reflective coating.
16.2 Decontamination and disinfection
The camera must be thoroughly cleaned, decontaminated and disinfected before ship-
ping to our service department. No hazardous residues are allowed on cameras. Such
residues include—but are not limited to—chemical fire-extinguishing compounds, ra-
dioactivity, biohazardous materials, and residues from chemical fires.
FLIR Systems reserves the right to charge the full cost for the decontamination and dis-
infection of contaminated cameras that are shipped to our service department.
#T810170; r. AE/41948/41948; en-US
51

Table of Contents

Related product manuals