System parts
9
9.1 Camera parts
9.1.1 Figure
9.1.2 Explanation
1. USB Mini-B connector: Connect to a computer to download images (FLIR K53 only)
and change settings using FLIR Tools.
2. Attachment point for the lanyard strap/neck strap (left and right sides).
3. Eccentric latch to secure the battery.
4. On/off button. This button has three functions:
• Push the on/off button to turn on the camera.
• Push and hold the on/off button for more than 3 seconds but less than 10 seconds
to put the camera into standby mode. The camera then automatically turns off after
6 hours.
• Push and hold the on/off button for more than 10 seconds to turn off the camera.
5. Pin hole for setting of the temperature unit (°C/°F).
6. Connectors for the in-truck charger.
7. Trigger.
8. Mount for the tripod adapter.
9. Attachment point for the retractable lanyard.
10. Battery.
#T810170; r. AE/41948/41948; en-US
15
To Next Page
Loading...
