Using the System
11
To use Real-time Backup:
1. Insert the USB thumb drive or external hard drive into one of the USB ports on the
system.
2. Move your mouse to the top of the channel display and click
to start Real-time
Backup.
3. Click
again to end Real-time Backup. The file is saved to your USB device.
NOTE
If the system prompts you to log in, you will need to click
again to start Real-time Backup after
logging in.
11.6 Using the Virtual Keyboard
The Virtual Keyboard is used to input text or numeric values in certain menus.
1. Backspace.
2. Enter capital letters.
3. Confirm entry.
#LX400051; r. 1.0/23100/23101; en-US
24
To Next Page
Loading...
Need help?
General
