FLIR M3200 Series User Manual

Using the Main Menu17
2. From the Main Menu, click
and then click Setting>Config Backup.
3. Under Device Name, select the USB device where you would like to save the
configuration.
4. Click EXPORT to save your current system configuration.
To restore a saved system configuration:
1. Insert a USB thumb drive (not included) with a saved system configuration into one of
the USB ports.
2. From the Main Menu, click
and then click Setting>Config Backup.
3. Under Device Name, select the USB device.
4. Click the folder with the configuration files you would like to restore. Configuration file
folders are labeled “Config” and then the time and date the configuration was saved (e.
g. Config_20140425103727).
5. Click IMPORT to restore the system configuration.
6. Click OK to confirm. The system will restart to complete the operation.
17.3.25 Setting the System to Factory Defaults
The Default menu allows you to reset the system to factory default settings.
#LX400051; r. 1.0/23100/23101; en-US
72

FLIR M3200 Series Specifications

General

Brand	FLIR
Model	M3200 Series
Category	DVR
Language	English