User Interface Menus
5
Figure 5.13 Selecting the ‘Center Spot’ mode from the main menu
• IGM™ Moisture mode: Select this mode to view the moisture measure-
ments on the upper left hand corner of the display. The IGM™ mode (Infra-
red Guided Measurement) is best suited for first scanning an area for
temperature measurements and then taking moisture measurements in the
strategic areas identified by the temperature measurements.
Figure 5.14 Selecting the IGM™ Moisture mode from the main menu
• IGM™ Custom mode: Select this mode to view all of the measurement
types on the MR277 that you enable in the Settings menu (see Section
5.8).
Figure 5.15 Selecting the IGM™ Custom mode from the main menu
#NAS100005; r. AL/76939/76957; en-US
14
To Next Page
Loading...
