Moisture Measurement Operation
7
5. When the measurement exceeds the threshold, the text for the measure-
ment reading will appear red in color. Note that in the Moisture-only mode,
the larger digits appear in red when the alarm limit is exceeded. See Fig-
ure 7–15 below.
Figure 7.15 Moisture Alarm display examples
6. If the beeper is enabled in step 3 above, the beeper will sound when the
moisture exceeds the threshold. To silence the beeper when the meter is
alarming, press Select
. The meter will open the ‘Settings’ menu where
you can opt to turn the beeper OFF or otherwise program the alarm
parameters.
#NAS100005; r. AL/76939/76957; en-US
39
To Next Page
Loading...
