427-0075-01-12 Version 110 November 2017 38
2 Basic Operation and Configuration
Sensor > Modules > Video
By default, four video streams are enabled for the camera: Video 0, Video 1, Video 2, and Video 3. The
streams are available for viewing from a client program such as FLIR Latitude, a stand-alone video
player, or a third-party VMS including ONVIF systems. By default, Video 0 and Video 1 are from the
visible camera, while Video 2 and Video 3 are from the IR sensor.
Caution!
To modify parameters that affect a particular IP Video stream from the camera, select the appropriate
link at the top of the page (for example, Video 0).
The default RTP Settings for connecting to an IP video stream
from the PT-Series HD are shown in the illustration. The RTP
Port and the Stream Name are used when establishing a
session from a client.
Given the camera IP address of 192.168.0.250, the complete
connection string for each of the video streams are as follows:
VIDEO 0 - rtsp://192.168.0.250:554/stream1/sensor1
VIDEO 1 - rtsp://192.168.0.250:554/stream2/sensor1
VIDEO 2 - rtsp://192.168.0.250:554/stream1/sensor2
VIDEO 3 - rtsp://192.168.0.250:554/stream2/sensor2
In addition, to maintain compatibility with legacy systems the
stream names are aliased as: ch0 = stream1/sensor1,
ch1 = stream2/sensor1, ch2 = stream1/sensor2, and ch3 = stream2/sensor2.
The video streams can be accessed with the shortened strings, such as rtsp://192.168.0.250/ch0.
Adjustments to these settings should only be made by someone trained with thermal cameras
and a thorough understanding of how the various settings affect the image.
Haphazard changes can lead to image problems including a complete loss of video.
To Next Page
Loading...
