Flo CoRe+ - Maintenance and Safety

CoRe+
TM
Cable management system and pedestal installation guide
19
Maintenance and Safety
Carefully read this guide before installing the pedestal
1. This pedestal was designed to be ground-based, it must be mounted on a non-combustible surface.
2. This pedestal was designed to help meeting American Disability Act requirments.
3. Make sure with local authorities that the location where the pedestal is to be installed is free from underground
pipelines or electrical equipment, otherwise you might inflict yourself serious injuries.
4. Grounding: to ensure the safe operation of the pedestal, it must be connected to a grounding circuit compliant
with local regulations and installed by a certied electrician.
5. Communicate with a certied contractor, certied electrician or trained installer to ensure compliance with
local building code, regulation, security standards and weather conditions.
6. Handle parts with care, since they can be sharp-edged. Always use safety glasses and gloves when unpacking
and installing.
7. Some parts are heavy and could cause injuries. Use proper lifting techniques and wear safety boots at all times
during installation.
IMPORTANT SAFETY INSTRUCTIONS - PLEASE DO NOT DISCARD THESE INSTRUCTIONS