Flo CoRe+ - Before getting started

CoRe+
TM
Cable management system and pedestal installation guide
6
• Determine where the wall mount (column) will be placed. Allow 12 to
14 in between the column and the charging station.
• Determine what wall attachment hardware is required (wall anchors,
screws and washers) to securely install the mount brackets to the
wall. Use ¼ in diameter screws and anchors of the appropriate size, if
the screws cannot be secured directly in a wall stud.
Recommendations : Install the column at least 6 in from the ground
(allow enough clearance to facilitate floor cleaning). The upper wall mount
bracket should be installed at least 60 in above the lower wall mount
bracket.
60 in
6 in
Floor
Before getting started