Flo Vigaro - Page 50

Declarations regarding electromagnetic compatibility
50
Recommended safety distances between portable and mobile RF
telecommunications equipment (e.g. mobile phone) and the FLO Vigaro:
The FLO Vigaro is intended for use in an electromagnetic environment in which RF disturbances
are controlled. The customer or user of the FLO Vigaro can help avoid electromagnetic
interference by maintaining minimum distances between portable and mobile RF
telecommunications equipment (transmitters) and the FLO Vigaro as specified below, according
to the output power of the communication equipment.
Transmitter’s
nominal output
W
Safety distance according to frequency of transmitter in
m
150 kHz - 80 MHz
d = 1.2 √P
80 MHz - 800 MHz
d = 1.2 √P
800 MHz to
2.5 GHz
d = 2.3 √P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
10
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended safety
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter (W) according to
the transmitter manufacturer.