GENERAL INFORMATION
9
1.2 Product conformity
All FLOWMAX water heaters are ETL certified and possess technical and functional characteristics that comply with
the following standards:
Gas fired water heaters also comply with the following standards:
American National Standard/CSA Standard for Gas Water Heaters Volume III, Storage Water Heaters with input
Ratings above 75,000 Btu per Hour, Circulating and Instantaneous. Conforms to ANSI STD Z21.10.3, certified to CSA
STD 4.3.
The materials used such as copper, brass, stainless steel, etc. form a compact, uniform, highly functional unit that is
easy to install and simple to operate. In its simplicity, the wall-mounted appliance is equipped with all the appropriate
accessories required to make it a fully independent water heater capable of satisfying domestic hot water production
and central heating needs. All water heaters are fully inspected and are accompanied by a quality certificate, signed by
the inspector, and a guarantee certificate. This manual must be kept in a safe place and must accompany the water
heater at all times.
FLOWMAX will not be held responsible for any misinterpretation of this manual resulting from the inaccurate
translation of same.
FLOWMAX will not be held responsible for the consequences in the case of non-observance of the
instructions contained in this manual or in the case where actions not specifically described herein are
undertaken.
To Next Page
Loading...