Flowserve Logix 3000MD Series - 3000 MD Series Facts

Logix 3000MD Series Digital Positioner FCD LGENTB0059-01 – 10/09
7
Time is Money
3400
• Three versions: Basic, Advanced (Advanced includes
pressure sensors), and Pro (Pro includes pressure sensors
and full featured valve diagnostics)
• ITK - CFF 4.6, 5.0
• DD available at www.fieldbus.org or www.flowserve.com
• Stores a valve signature onboard in NVRAM
Linkable Position Feedback as part of the AO Function block.•
Contains: AO, PID, 2-DI, DO, OS, IS function blocks.•
• Onboard temperature sensor to measure local positioner
ambient
• Stroke speed limiter (configurable in transducer block)
• Stainless steel version available
DTM Available•
3200
• Three versions: Basic, Advanced (Advanced includes
pressures), Pro (Pro includes pressure sensors and full
featured valve diagnostics)
• HART Command 1, 3, 9, 33 & 48
• Burst Mode available to continuously transmit
• Position command analog loop current
• Final value of command after characterization
• Supply pressure (advanced), Temperature (basic)
• Stem position in percent
• Onboard temperature sensor to measure local positioner
ambient
• Stroke speed limiter (configurable through HART)
• Stainless steel version available
• Enhanced Device Description for advanced signature
diagnostics
• Step test, friction test, HRL, data logger
DTM Available•
3000MD Series Facts
Shorter commissioning time gets you up and running, making money faster
BONUS
Plant commission schedule
Logix
3000MD
Series
Other digital
positioners
Time to Startup and Commission
The local interface in the 3000MD series positioners and the two way communication capability allows the user to quickly
commission loops.