Name: Fluidwell F103 WP
Brand: Fluidwell
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Page 15

FW-F103-P-XN-M_v2002_03_EN.docx

Step 2b: Changing the selected item in a list

SELECT-key

This key is used to select the next item in the list (e.g. Disable → Enable).

At the end of the list, the selection will wrap around to the first selection.

CLEAR-key

This key is used to select the previous item in the list (e.g. Enable → Disable ).

At the bottom of the list, the selection will wrap around to the last selection.

Step 3: Finishing the programming sequence

PROG-key

During the programming sequence, this key is used to confirm the new value and

return to SETUP-level. To cancel the operation, either press the PROG-key for 3

seconds or wait for 20 seconds: the programming sequence is cancelled and the

former value is reinstated.

3.2.4 RETURNING TO OPERATOR-LEVEL

When all settings are configured correctly, the unit can be returned to OPERATE-level.

Please keep a record of all settings for later reference.

Use the control panel to return to OPERATE-level

PROG-key

In order to return to the operator level, press the PROG-key for three seconds.

When no keys are pressed for 2 minutes, SETUP-level will be left automatically.

Questions and Answers:

Need help?

Do you have a question about the Fluidwell F103 WP and is the answer not in the manual?

Fluidwell F103 WP Specifications

General