To Next PageTo Next Page
Need help?Do you have a question about the Fluidwell F103 WP and is the answer not in the manual?
General| Brand | Fluidwell |
|---|---|
| Model | F103 WP |
| Category | Measuring Instruments |
| Language | English |
Guidelines for proper disposal of electronic waste and compliance with WEEE Directive.
Essential safety rules and precautions for operating and handling the device.
Information on obtaining warranty and technical support for the F103-P.
Details on available F103-P models and their default configurations.
Overview of the F103-P's functions, features, and design focus.
Basic operational guidelines and user responsibilities for the F103-P.
Description of the control panel keys and their functions.
Details on displayed values, clearing totals, and flow rate monitoring.
Information on operator alarms, including low-battery and internal alarm codes.
Guide to quickly setting up frequently used parameters on the F103-P.
Overview of configuration chapters meant for electricians and technicians.
Guidance on entering and navigating the setup menu for device configuration.
Summary of configuration settings available within the setup menus.
Detailed explanation of configuration settings related to Total and Accumulated Total.
Detailed explanation of configuration settings for Flowrate.
Detailed explanation of configuration settings for the display and day totals.
Detailed explanation of power management settings for battery life optimization.
Detailed explanation of flowmeter signal and unit configuration settings.
Detailed explanation of linearization function and K-factor settings.
Detailed explanation of analog output configuration and tuning.
Detailed explanation of pulse output configuration for digital signals.
Configuration settings for Modbus communication interface.
Configuration settings for models without data logging.
Configuration settings for datalogging functions for models with Type ZL.
General directions for installation and safety precautions.
Guidelines for installing the unit in various environmental conditions.
Procedures for safely handling and opening the F-Series enclosure.
Dimensions and mounting configurations for different enclosure types.
Guidelines for safe and compliant electrical installation, including safety and wiring.
Overview and detailed explanation of all terminal connectors and their functions.
General maintenance guidelines and precautions.
Procedure for returning the product for repair and warranty conditions.
Instructions for replacing the main and clock backup batteries.
General specifications including display, enclosures, and control keys.
Specifications for different power supply types and their consumption.
Details on sensor excitation voltage for pulse and coil inputs.
Information on data backup, retention, and password protection.
Classification and standards for hazardous area installations.
List of applicable directives and standards for the F103-P.
Specifications for terminal connectors, including torque and wire sizes.
Troubleshooting steps for when the flowmeter fails to generate pulses.
Troubleshooting for excessive pulse generation from the flowmeter.
Steps to diagnose and resolve issues with the analog output.
Troubleshooting guide for non-functional pulse outputs.
Diagnosing flow rate display errors when total is counting.
Checks for issues with the linearization function.
Guidance on what to do if the setup password is lost.
Explanation of alarm flags, error codes, and recoverable/non-recoverable errors.
Introduction to Modbus communication protocol and supported function codes.
Explanation of how to handle variables spanning multiple Modbus registers.
List of datatypes used for Modbus communication with the F103-P.
Wiring diagram and terminal layout for F1-Series devices.
