Page 49
FW-F103-P-XN-M_v2002_03_EN.docx
Operational
• Linearized flow rate, total and accumulated total
• Current Day total, previous day total and 15 historical day totals
• Indicating speedometer for flow rate
• Total can be reset to zero by pressing the CLEAR-key twice
• Reviewing historical day totals or reviewing the various logbooks (Type ZL)
L, m3, US gal, igal, cf, Oil bbl, kg, ton, US ton, lb or none.
Total can be reset to zero.
According to selection for total
0:00 – 23:00, settable per whole hour
Running total, started at zero after the last contract hour
Fixed total, copied from current day total at the last contract hour
The last 15 previous day totals are stored and can be reviewed on the display (without type ZL)
Current day total cannot be reset to zero.
According to selection for total.
Accumulated total cannot be reset to zero.
mL, L, m3, mg, g, kg, ton, US ton, US gal, igal, Oil bbl, lb, cf, rev, none, scf, nm3, nL or p.
20 blocks, each block is 5% of total span
/sec - /min - /hr - /day.
Powerful data and event logging functions and logbooks are available.
Log records go round trip, the oldest entries are overwritten when the logbook is full.
When ordered with Type ZL - Datalogging, the historical day totals are not available.
1000 records
Single daily log: 1000 days, 1 record per day
Dual daily log: 500 days, 2 records per day
To Next Page
Loading...
Need help?
General
