1
Electrical Installation Tester
Introduction
The Fluke Model 1651, Model 1652, and Model 1653 are
battery powered electrical installation testers. This manual
applies to all three models. All figures show the Model
1653.
The 165X testers are designed to measure and test the
following:
• Voltage and
Frequency
• Residual Current
Devices (RCD) Tripping
Time (EN61557-6)
• Insulation Resistance
(EN61557-2)
• RCD Tripping Current
(EN61557-6)
• Continuity
(EN61557-4)
• Earth Resistance
(EN61557-5)
• Loop/Line Resistance
(EN61557-3)
• Phase Sequence
(EN61557-7)
Contacting Fluke
To contact Fluke, call one of the following telephone
numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke’s Web site at www.fluke.com.
To register your product, visit register.fluke.com.
To Next Page
Loading...
