165X
Users Manual
36
Storing and Recalling Measurements
(Model 1653 Only)
.
Using Memory Mode
You can store up to 500 measurements on the tester. The
information stored for each measurement consists of the
test function and all user selectable test conditions.
Data for each measurement is assigned a data set
number, data subset number, and a data id number.
Memory location fields are used as described below.
Field Description
f Use the data set field (a) to indicate a
location such as a room or electrical
panel number.
g Use the data subset field (b) for circuit
number.
Field Description
h The data id number field (c) is the
measurement number. The
measurement number automatically
increments. The measurement number
can also be set to a previously used
value to overwrite an existing
measurement.
To Next Page
Loading...
