Fluke 1736 User Manual

Power Logger
Electrical Specifications
69
Power Quality Measurements
Measured Parameter .......................................... Voltage, Frequency, Unbalance, Voltage Harmonics, THD V, Current Harmonics, THD A, and TDD
(requires IEEE519/Report license)
Averaging Interval ............................................... 10 min
Individual Harmonics .......................................... 2
nd
… 50
th
Total Harmonic Distortion ................................... Calculated on 50 harmonics
Events ................................................................. Voltage: Dips, Swells, Interruptions
Current: Inrush Current
Triggered Recordings ......................................... 1738 or 1736 with 1736/Upgrade license
Half cycle RMS of Voltage and Current
Waveform of Voltage and Current
Standards Compliance
Harmonics .......................................................... IEC 61000-4-7: Class 1
IEEE 519 (short time harmonics, requires IEEE519/Report license)
Power Quality ..................................................... IEC 61000-4-30 Class S, IEC62586-1 (PQI-S device)
Power ................................................................. IEEE 1459
Power Quality Compliance ................................. 1738 or 1736 with 1736/Upgrade license
EN50160 (for measured parameters)
Interfaces
USB-A ................................................................. File transfer via USB Flash Drive, Firmware updates, max. supply current: 120 mA
WiFi
Supported modes ........................................... Direct connection and connection to infrastructure (requires WiFi-Infrastructure license)
Security ........................................................... WPA2-AES with pre-shared key
Bluetooth ............................................................ read auxiliary measurement data from Fluke Connect 3000 series modules (requires WiFi/BLE adapter
USB1 FC)
USB-mini ............................................................ Data download device to PC
Extension port ..................................................... Accessories

Fluke 1736 Specifications

General

Product type	Three phase power measurement logger
Cable lock slot type	Kensington
International Protection (IP) code	IP50
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 12000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Built-in display	Yes
Display diagonal	4.3 \
Touchscreen type	Resistive
Display resolution	480 x 272 pixels
Display technology	TFT
Efficiency	68.2 %
Battery life	4 h
Charging time	6 h
Battery voltage	3.7 V
Input frequency	50/60 Hz
Battery capacity	9.25 Wh
Power consumption (max)	50 VA
Battery life (power save mode)	5.5 h

Weight and Dimensions

Depth	55 mm
Width	198 mm
Height	167 mm
Weight	1100 g
Power adapter weight	400 g
Power supply dimensions (WxDxH)	130 x 45 x 130 mm