4-1
Chapter 4
Performance Verification
Title Page
4.1 Introduction..................................................................................................4-3
4.2 Equipment Required for Verification ..........................................................4-4
4.3 Relation between Characteristics and Performance Test.............................4-4
4.4 General Instructions.....................................................................................4-5
4.5 Operating Instructions..................................................................................4-5
Resetting the Analyzer ..................................................................................4-5
4.6 Display and Backlight Test..........................................................................4-5
4.7. Verification of Current Inputs.....................................................................4-5
4.7.1 Preparation............................................................................................4-5
4.7.2 Accuracy...............................................................................................4-6
4.7.3 Bandwidth check of current channels (*).............................................4-7
4.8 Voltage Inputs..............................................................................................4-8
4.8.1 Introduction ..........................................................................................4-8
4.8.2 Verification of voltage inputs in 120 V range......................................4-9
4.8.3 Verification of voltage inputs in 230 V range......................................4-11
4.8.4 Verification of voltage inputs in 400 V range......................................4-13
4.8.5 Verification of voltage inputs in 6 kV range (Transients)....................4-15
4.9 Channel Isolation (*) ...................................................................................4-17
To Next Page
Loading...
Need help?
General
