Safety Instructions
1.1 Introduction 1
1-3
1.1 Introduction
Read these pages carefully before beginning to install and use the Analyzer.
The following paragraphs contain information, cautions and warnings which must be
followed to ensure safe operation and to keep the Analyzer in a safe condition.
Warning
Servicing described in this manual is to be done only by
qualified service personnel. To avoid electrical shock, do not
service the Analyzer unless you are qualified to do so.
1.2 Safety Precautions
For the correct and safe use of this Analyzer it is essential that both operating and service
personnel follow generally accepted safety procedures in addition to the safety
precautions specified in this manual. Specific warning and caution statements, where
they apply, will be found throughout the manual. Where necessary, the warning and
caution statements and/or symbols are marked on the Analyzer.
1.3 Caution and Warning Statements
Caution
Used to indicate correct operating or maintenance procedures
to prevent damage to or destruction of the equipment or other
property.
Warning
Calls attention to a potential danger that requires correct
procedures or practices to prevent personal injury.
1.4 Symbols
The following symbols are used on the Analyzer, in the Users Manual, in this Service
publication, or on spare parts for this Analyzer.
See explanation in Users Manual
DOUBLE INSULATION (Protection
Class)
Live voltage
Earth Ground
Static sensitive components
(black/yellow).
Recycling information
Do no dispose of this product as
unsorted municipal waste. Go to
Fluke’s website for recycling
information
Conformité Européenne
To Next Page
Loading...
Need help?
General
