Portable Pressure Calibrator
Pressure Measurement
27
3. The first option is the port setting. Use the "SELECT" option to scroll through the
choice of ports (pressure connections). When this is done, select the "NEXT" option.
See Figure 29.
hbb028.eps
Figure 29. Port Setting Screen
4. "LOOP POWER" can be toggled on or off. Select "NEXT" when done. See
Figure 30.
hbb029.eps
Figure 30. Loop Power Screen
5. Use "SELECT" to scroll through the "UNIT" options, and select "NEXT" to move
on. See Figure 31.
hbb030.eps
Figure 31. Set Unit Screen
To Next Page
Loading...
