Fluke 3130 - Setting the Upper Limit; % ERROR Screen; Saved Upper and Lower Limits

3130
Users Manual
28
6. Use the arrow keys to set the upper limit of the measurement range. Select DONE
SET when finished. See Figure 32.
hbb031.eps
Figure 32. Setting the Upper Limit
7. Use the arrow keys to set lower limit of the measurement range, and select DONE
SET when finished. The "%-ERROR" mode will be ready to use. See Figure 33.
hbb032.eps
Figure 33. % ERROR Screen
The lower and upper limit of the measuring range is saved in non-volatile memory
until they are changed by the user for the internal sensors and the external pressure
modules. See Figure 34.
hbb033.eps
Figure 34. Saved Upper and Lower Limits