Fluke 43 - Connecting to a Printer

Fluke 43
Users Manual
20
Using a Printer
This section describes how to connect a printer and how to setup the Fluke 43
for the connected printer.
Connecting to a Printer
Serial printer
Connect the Fluke 43 to a serial printer as shown in Figure 6.
•
Use the Optically Isolated RS232 Cable (PM9080).
Figure 6. Connecting a Serial Printer
Parallel printer
Connect the Fluke 43 to a parallel printer as shown in Figure 7.
•
Use the Print Adapter Cable (PAC91, optional).
Figure 7. Connecting a Parallel Printer