Fluke 43 - Resetting the Fluke 43

Fluke 43
Users Manual
22
Resetting the Fluke 43
To restore the Fluke 43 to its factory settings and return to the opening screen,
reset the Fluke 43. Resetting does not clear screen memories.
Turn the Fluke 43 off and proceed as follows:
1
Press and hold.
2
Press and release.
The Fluke 43 turns on, and you should hear a double beep, indicating that the
reset operation was successful.
Figure 8. Resetting the Fluke 43
(3)
Release the
HOLD
key.
The opening screen with default settings
appears on the display.
4
Continue.