31
Chapter 3
Specifications
Introduction
Safety Characteristics
The Fluke 43 has been designed and tested in accordance with the following
standards: ANSI/ISA S82.01-1994, EN 61010.1 (1993) (IEC 1010-1),
CAN/CSA-C22.2 No.1010.1-92 (including approval), UL3111-1 (including
approval) Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use.
This manual contains information and warnings that must be followed by the
user to ensure safe operation and to keep the instrument in a safe condition.
Use of this equipment in a manner not specified by the manufacturer may
impair protection provided by the equipment.
Performance Characteristics
FLUKE guarantees the properties expressed in numerical values with the
stated tolerance. Specified non-tolerance numerical values indicate those that
could be nominally expected from the mean of a range of identical ScopeMeter
test tools.
Environmental Data
The environmental data mentioned in this manual are based on the results of
the manufacturer’s verification procedures.
To Next Page
Loading...
Need help?
General
