Fluke 43 - Chapter 1: Introducing the Fluke 43; Powering the Fluke 43

5
Chapter 1
Introducing the Fluke 43
Powering the Fluke 43
To power the Fluke 43 from a standard AC outlet, perfom steps 1-3.
For battery power, see Chapter 2.
1
Plug the power adapter in the AC outlet.
2
Connect the power adapter cable to the Fluke 43 (see Figure 2).
Figure 2. Powering the Fluke 43
3
Turn the Fluke 43 on.
The opening screen will appear on the display (see Figure 3).
Note
If the Fluke 43 does not turn on, the batteries may be dead. Leave the
Fluke 43 connected to the outlet for 15 minutes and try again.