23
Chapter 2
Maintenance
Cleaning and Storage
Cleaning the Fluke 43
Clean the Fluke 43 with a damp cloth and a mild soap. Do not use abrasives,
solvents or alcohol. These may damage the text on the Fluke 43.
Storing the Fluke 43
When storing the Fluke 43, even for extended periods of time, it is not necessary
to remove the battery pack. However, the batteries will gradually decharge. To
keep the batteries in optimal condition, charge the batteries periodically (once per
month).
Cleaning the Current Probe
Periodically wipe the case with a damp cloth and detergent. Do not use
abrasives, solvents or alcohol. Open the jaws and wipe the magnetic pole pieces
with a lightly oiled cloth. Do not allow rust or corrosion to form on the magnetic
core ends.
To Next Page
Loading...
