Fluke 7008 - 3 Specifications and Environmental Conditions; Specifications

3-1
Chapter 3
Specifications and Environmental
Conditions
3.1 Specifications
Table 2. Specifications
Temperature range −5 °C to 110 °C
Temperature set ability ±0.002 °C
Temperature reset ability ±0.002 °C
Accuracy ±1.0 °C
Stability ±0.0007 °C at 25 °C (water)
0.001 °C at 25 °C (mineral oil)
Tank capacity 42 liters (11.2 gal)
Access opening 323.9 mm x 184.2 mm (12.75 in x 7.25 in)
Cooling capacity 100-200 watt
Refrigeration 1/5 Hp
Heaters 500 and 1000 watt
Power 115 V AC ( ±10 %), 60 Hz, 15 A, 1290 W
230 V AC ( ±10 %), 50 Hz, 8 A, 1290 W (optional)
230 V AC ( ±10 %), 60 Hz, 8 A, 1400 W (optional)

 NOTE: If voltage is outside the ±10 %, the compressor may be
damaged. 230 V models are frequency specific.
System fuse 115 V: 15 A 250 V SB
230 V: 8 A 250 V SB
Heater fuse 115 V: 10 A 250 V FB
230 V: 6 A 250 V FB
Exterior dimensions 77.5 cm W x 61 cm H x 48.3 cm D
(30.5 in x 24 in x 19 in)
Shipping weight 61 kg (135 lb.)
Safety OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per
IEC1010-1