Fluke 8558A Operator's Manual

8588A/8558A
Operators Manual
100
Remote Settings
The Remote Settings menu shows a list of parameters for the remote interface.
From the Instrument Setup menu, push  (Remote Settings) to use the
Remote Settings submenu. See Table 23.
See the Remote Programmer’s Manual for details of setting up and using the
remote interfaces.
Table 23. Remote Settings Submenu
Menu Parameter Change the Parameter
Emulation
The Product remote interface can emulate the Fluke 8508A () or the
HP/Agilent/Keysight 3458A () digital multimeters. If  (None) is
selected, the Product uses its native SCPI commands.
Active Port
To choose the active remote port, use the navigation keys to move the cursor
to highlight the active-port field. The choice are:
•  (GPIB)
•  (Ethernet)
•  (USB)
GPIB Address
To change the GPIB Address, use the navigation keys to highlight the GPIB
Address field and then use the numerical keys to change the address. When
done, push  to store the address.
Ethernet
To change the Ethernet settings, use the navigation keys to highlight the
Ethernet Settings field, push  and then use the navigational keys,
softkeys, and numerical keys to change the settings. You can change DHCP,
Ethernet IP Address, Gateway, Subnet Mask, Port, Remote IF, and EOL.

Fluke 8558A Specifications

General

Brand	Fluke
Model	8558A
Category	Multimeter
Language	English