Reference Multimeter and 8 ½ Digit Multimeter
Placement and Rack Mounting
5
Standard Equipment
Check that all items listed in Table 1 are included:
Table 1. Standard Equipment
Item Fluke Calibration Part Number
8588A Reference Multimeter 4983182
8558A 8 ½ Digit Multimeter 4983194
Mains Power Cord See Mains Voltage
8558A/8588A Safety Information (printed) 4769456
8588A-LEAD KIT-OSP
General Purpose Probe Kit & Pouch
4951331
Calibration Certificate -
Placement and Rack Mounting
Put the Product on top of a workbench or mount the Product in a standard 48-cm
(19-inch) wide, 61-cm (24-inch) deep equipment rack. For bench-top use, the
Product has non-slipping, non-marring feet.
To mount the Product in an equipment rack, order the accessory Y8588 or
Y8588S for the sliding option.
XWWarning
To prevent possible electrical shock, fire, or personal injury, do
not restrict access to the Product mains power cord. The mains
power cord is the mains disconnecting device. If access to the
power cord is inhibited by rack mounting, a properly rated
accessible mains disconnecting switch must be provided within
reach as part of the installation.
To Next Page
Loading...
