Motor & Phase Rotation Indicator
Safety Information
3
XW Read First: Safety Information
To avoid possible electric shock or fire, do the following:
• Read the following safety information carefully before using or
servicing the instrument.
• Adhere to local and national safety codes.
• Individual protective equipment must be used to prevent shock and
injury
• Use of instrument in a manner not specified by the manufacturer may
impair safety features/protection provided by the equipment.
• Avoid working alone.
• Inspect the test leads for damaged insulation or exposed metal. Check
test lead continuity. Damaged leads must be replaced. Do not use the
9062 if it looks damaged.
• Be careful when working above 30 V ac rms, 42 V ac peak and 60 V dc.
Such voltages pose a shock hazard.
• When using the probes, keep fingers away from probe contacts. Keep
fingers behind the finger guards on the probes.
To Next Page
Loading...
