9062
Users Manual
4
• Measurements can be adversely affected by impedances of additional
operating circuits connected in parallel or by transient currents.
• Verify operation on a known source prior to measuring hazardous
voltages (voltages above 30 V ac rms, 42 V ac peak and 60 V dc).
• Do not use the 9062 with any of the parts removed.
• Do not use the 9062 around explosive gas, vapor, or dust.
• Disconnect the test leads from power sources and the 9062 before
changing the battery.
• Do not use the 9062 in a wet environment.
To Next Page
Loading...
