COMMAND REFERENCE 4 - 35
CALCulate<n>:INTegral:STATe
Syntax:
CALCulate<n>:INTegral:STATe <Boolean>
<n> [1] | 2
Query form:
CALCulate<n>:INTegral:STATe?
Response:
0 | 1
0 Integrate function turned off.
1 Integrate function turned on.
Description:
This command switches the integrate function on or off. The result of the integrate
function is stored in M1_n for CALCulate1 and in M2_n for CALCulate2 depen-
dent on the input source CHn or Mi_n (n = 1, 2, 3, 4).
After a
*
RST command, the integrate function is turned off.
Example:
Send
→ CALCulate:INTegral:STATe ON Switches the integrate function on.
Front panel compliance:
The CALCulate1 and CALCulate2 commands use the MATH1 and MATH2
features of the CombiScope instrument.
To Next Page
Loading...
