COMMAND REFERENCE 4 - 47
DISPlay:MENU:STATe
Syntax:
DISPlay:MENU:STATe <Boolean>
Query form:
DISPlay:MENU:STATe?
Response:
0 | 1
0 Display turned off.
1 Display turned on.
Description:
Switches the display of the softkey menu field on or off.
After a
*
RST command, the display is turned off.
Example:
Send
→
*
RST Selects TB MODE menu with display off.
Send
→ DISPlay:MENU:STATe ON Switches TB MODE menu display on.
Front panel compliance:
The DISPlay:MENU:STATe command remotely enables one of the front panel
menus TB MODE, TRIGGER, DTB, SETUPS, CURSORS, ACQUIRE, DISPLAY,
MATH, MEASURE, SAVE, RECALL, UTILITY or VERT MENU.
To Next Page
Loading...
