1
Calibration Manual
Introduction
W Warning
The information provided in this manual is for the use of qualified
personnel only. Do not perform the verification tests or calibration
procedures described in this manual unless you are qualified to do so.
Caution
The 787 ProcessMeter
contains parts that can be damaged by static
discharge. No procedure in this document requires the case to be
opened. If you do so, follow the standard practices for handling static
sensitive devices.
The Calibration Manual for the 787 ProcessMeter (hereafter, also referred to as “the
ProcessMeter” or “the UUT”) provides the following information:
• Precautions and Safety information
• Specifications
• Basic maintenance (cleaning, replacing the battery and fuses)
• Verification test procedures
• Calibration and calibration adjustment procedures
• Accessories and replaceable parts
For complete operating instructions, refer to the 787 ProcessMeter Users Manual (on the
CD-ROM provided).
To contact Fluke, call:
USA : 1-888-99-FLUKE (1-888-993-5853) Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-678-200 Japan: +81-3-3434-0181
Singapore: +65-738-5655 Anywhere in the world: +1-425-446-5500
Address correspondence to:
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090, P.O. Box 1186,
Everett, WA 98206-9090 5602 BD Eindhoven
USA The Netherlands
Or visit us on the World Wide Web: www.fluke.com
To Next Page
Loading...
Need help?
General
