30
TS54TDR PRO Test Set
Users Guide
Accessories
To order accessories, contact your local Fluke Networks
distributor.
Specifications
Description*
Fluke Networks Model
Number
Belt clip BELTCLIP-TS
Test leads with piercing-pin clips TESTLEAD-PIERC-PIN
Test leads with a 346A plug for the central office
2
TEST-LEAD-CO-346A
Test leads with angled bed-of-nails (ABN) and piercing-pin clips TEST-LEAD-ABN-PPIN
Test leads with alligator clips TEST-LEAD-ALIG-CLP
Test leads with an RJ11 plug, angled bed-of-nails (ABN), and piercing-pin clips TESTLEAD-ABNPPRJ11
Test leads with a 4 mm banana plug and alligator clips TEST-LEAD-BANA-CLP
Headset HEADSET-TS
Hanger kit (magnetic and clip-on hangers for the test set) TEST-SET-HANGER-TS
* When you use these test leads, the TDR accuracy specifications do not apply.
Electrical
Current Range
(Off-Hook)
10 mA to 100 mA
DC Resistance
Off-Hook 150 Ω nominal
On-Hook >3 MΩ
AC Impedance
Off-Hook
600 Ω nominal; 300 Hz to
3400 Hz
On-Hook >120 kΩ; 300 Hz to 3400 Hz
Headset
impedance
32 Ω
Rotary Dial Output
Pulsing Rate 10 pps ±1 pps
Break/Make Ratio 60/40
Interdigit Interval >300 ms
Resistance During
Break
>100 kΩ
DTMF Output
Tone Frequency
Error
±1.5 % maximum
Tone Level -3 dBm combined (typical)
High versus Low
Tone Difference
2 dB ± 2 dB
To Next Page
Loading...
