Flyer GOROC User Manual

149
EN
18. Wearing parts
Your FLYER is a technical product and therefore
requires regular inspection.
Depending on the function and despite the de
-
gree of use, many parts on your FLYER are able
to show signs of wear and tear.
This includes:
• Tyres
• Brake pads
• Brake discs
• Bicycle chains
• Chain wheels, sprockets, jockey wheels
• Handlebar grips
• Gear and brake cables
• Bearings
• Suspension elements
Have your FLYER regularly inspected in
a FLYER specialised workshop and
have wearing parts changed as re
-
quired. Regular visual inspection for
cracks, scratches and damage to com
-
ponents is the responsibility of the driver.
The bicycle is subject to wear and high
stress as are all other mechanical com
-
ponents. Depending on the degree of
stress imposed on them, different mate
-
rials and parts may react differently in
terms of wear and fatigue. A part may
suddenly fail and cause injuries to the
driver when its designed service life is
exceeded. Any kind of cracks, scratches
or colour changes in high-stress areas
are an indicator that the service life of
the component has been exceeded and
that it should be replaced.
19. Inspection plan
After the rst 200 ridden kilometres
or after 4 months:
FLYER specialist retailer
• Check the rm attachment of all screws, nuts
and quick release fasteners
• Check the wheels and centre them as required
• Check the tyres
• Check the fastening torque on all parts
• Adjust the headset
• Check the brake and shifter cables
• Check the gear system and adjust if necessary
• Check the brakes, adjust if necessary
• Check the suspension elements, adjust if nec
-
essary
• Sufcient lubrication of all components
FLYER driver
During your e-bike's rst
inspection by the FLYER specialist retailer, ask
them to explain the correct processes for clean
-
ing and oiling the chain after rain and checking
components for function or damage.
Before each ride – FLYER driver
• Check the correct position of the bell
• Check the function of the brakes
• Check the function of the gear system
• Check the function and correct setting of sus
-
pension elements
• Are all quick release fasteners, quick release
axles, screws and nuts completely closed and
fastened?
• Check that the tyre pressure is correct
• Check the wheels for true running and dam
-
age as well as safe attachment and correct
fastening
• Check that the handlebars, stem, seat post
and seat are safely attached and correctly po
-
sitioned
• Check the battery's charge status
• Check that the battery is correctly and securely
attached.
After each ride – FLYER driver
• Cleaning the FLYER e-bike
• Visual inspection of the frame and of
components for cracks and damage
• Check the tyres for damage, wear, brittleness,
alien objects and sufcient prole depth
• Check the rims for wear and true running
• Check the tension of the spokes
• Clean the chain and sprockets as required
and lubricate them with a suitable chain oil ap
-
proved by the manufacturer

Flyer GOROC Specifications

General

Brand	Flyer
Model	GOROC
Category	Scooter
Language	English