Flyer GOROC User Manual

151
EN
20. Technical data
Maximum permissible weight for all 3 models:
The FLYER e-MTB is designed for a maximum
overall weight (driver, luggage, vehicle and bat
-
tery) of 130 kg.
FLYER weight (without battery)
– Goroc 17.0 kg*
– Uproc3 19.4 kg*
– Uproc 6 19.4 kg*
*The actual weight depends on the frame type,
the frame size and the accessories.
20.1 The E-MTB Batteries (36 V)
Capacity Energy content Weight
11.0 Ah 400 Wh 2.5 kg
13.4 Ah 500 Wh 2.6 kg
Support levels
Performance Cruise
(Chain gears)
250 W up to 275%
(Turbo)
Performance CX
(Chain gears)
250 W up to 300%
(Turbo)
20.2 Torques for screw connections
Stated values in Nm
Goroc Uproc3 Uproc6
6.30 8.70 6.30 8.70 8.70 8.90
Cockpit
Handlebar grips 3 3 3 3 2 2
Brake levers 6–8 6–8 6–8 6–8 6–8 6–8
Gear shift lever 3 3 3 3 3 3
Display holder 1 1 1 1 1 1
Remote display 1 1 1 1 1 1
Remote seat post – – – – 5–6 5–6
Handlebars on stem 5–6 5–6 5–6 5–6 5–6 5–6
Stem on fork shaft 5–6 5–6 5–6 5–6 5–6 5–6
Motor
Motor screws 25–30 25–30 25–30 25–30 25–30 25–30
Chain ring screws 30 30 30 30 30 30
Motor plate 13–15 13–15 13–15 13–15 13–15 13–15
Crank 45–55 45–55 45–55 45–55 45–55 45–55
Pedals 34 34 34 34 34 34
Battery holder 4 4 4 4 4 4
Battery lock 4–5 4–5 4–5 4–5 4–5 4–5
Derailleur/chain tensioner 8–10 8–10 8–10 8–10 8–10 8–10
Wheels/brakes
Brake calliper disc brake 6–8 6–8 6–8 6–8 6–8 6–8
Cassette 30–50 30–50 30–50 30–50 30–50 30–50
Speed-Sensor 3 3 3 3 3 3
Magnet 1 1 1 1 1 1
Seat
Seat frame 12 12 9–11 9–11 10 10
Seat post clamp 6–8 6–8 4–5 4–5 4–5 4–5
Chain-
stay
Rocker on seat tube – – 8–10 8–10 8–10 8–10
Remaining screws – – 13–15 13–15 13–15 13–15
Components may be damaged if you do
not adhere to the prescribed fastening
torques. You should therefore always
adhere to the prescribed torque.
A torque spanner must be used for fas-
tening the screw connections. Parts
tightened with the incorrect torque could
become loose or break.

Flyer GOROC Specifications

General

Brand	Flyer
Model	GOROC
Category	Scooter
Language	English