156 157
EN
Ask your FLYER specialist retailer to ex-
plain in detail how the wheels and all rel-
evant parts are to be correctly and safely
attached using the quick release fastener
or quick release axle system installed.
Inappropriately installed wheels may
shift while you are driving or detach from
the vehicle. This may damage the vehi-
cle and lead to severe or life-threatening
injuries to the driver. It is therefore im-
portant to take note of the following in-
structions:
Ensure that the axle, the dropouts and
quick release mechanisms are free of
dirt. Take care that they are correctly at-
tached at all times.
Contact your FLYER specialist retailer
and have your vehicle checked when
you are not sure.
Check that all quick release fasteners
and quick release axles are rmly at-
tached, even if your FLYER only re-
mained unsupervised for a short time.
You may only start driving when all quick
release fasteners are rmly closed.
Suntour Q-Loc axle
Installation
1. Check the ange and open the lever fully be-
fore installation
2. Push in the axle until it clicks
3. Adjust the tension with the lever half open until
the ange ts closely
4. Close the lever fully. Check the t and retighten
if necessary
To Next Page
Loading...
