170 171
Have the brake pads regularly checked accord-
ing to manufacturer specications by your FLYER
specialist retailer.
It is essential to switch off the electrical
operating system and remove the bat
-
tery before any form of maintenance
work is carried out.
Maintenance work on the brakes must
be undertaken by a FLYER specialist.
Liquids containing oil may never be ap
-
plied to brake pads, brake surfaces of
the rim, brake blocks or brake discs.
These substances reduce the effective
-
ness of the brakes.
Switch off the operating system
1
Removing the battery
2
Performing maintenance work
3
Do not drive when brake pads, brake
blocks, brake discs or rims are polluted
with lubricant. Dirty pads and blocks
must be replaced and dirty rims and
brake discs must be cleaned.
16. Lighting system
Your FLYER e-bike's lighting system is usually
powered by the battery. The lighting function is
ensured for a maximum of one hour after the bat
-
tery is empty.
The headlight must be aligned to illuminate the
road according to the legal regulations of your
country.
If necessary, have the lighting system
checked and changed by your specialist
retailer when you discover faults in its
function.
Some models are equipped with daytime driv
-
ing lights. These are supplied by various energy
sources depending on the riding situation.
Clean your reectors and lights on a
regular basis. Warm water with cleaning
uid or washing up liquid is suitable here.
The lighting system is key and it is vital
that it is proper working condition. Only
allow authorised FLYER specialist retail
-
ers to perform checks and servicing work
after failures or temporary problems.
To Next Page
Loading...
