FlySky Noble NB4+ - 4.3 Transmitter LED Indicator; 4.4 Power Off

Website
10
 

4.4PowerO󽗈

• 󽗈

󽗈
 󽗉
 󽗈
4.3TransmitterLEDIndicator
󽗉󽗈


channels of the primary and secondary receivers respectively, and then click "Classic receiver" and "Enhanced
receiver" to enter binding state.
2. The default start channel of the primary receiver is "Steering", and that of the secondary receiver is automatically
adjusted according to the number of channels of the transmitter. For example, if the transmitter has 4 channels,
the default start channel of the secondary receiver is “Steering”; when there are more than 4 channels, CH5 is
the default start channel.
3. Di󽗈erent receiver models are slightly di󽗈erent in binding operation. Please refer to the receiver's manual for
speci󽗉c steps.