FlySky Noble NB4+ - 6. Function Settings; 6.1 REV; 6.2 EPA

Website
12
6.FunctionSettings
6.1REV
6.2EPA
󾗜
 

 󾖶󾖶󾖶󾖶

 
󾖷



Notes:
1. The default ex-factory state of this transmitter allows the user to set the functions under CH1-CH4, follow
the steps for speci󽗉c function settings for other channels (Refer to Channel Number De󽗉nition of 6.9 MODEL
for setting 6 channels or 8 channels).
2. Some functions are disabled by default, and you may need to tap and enable the function for the setting
to take e󽗈ect.
3. The function menus may vary with the receiver protocols. The actual product menu shall prevail.


 
󾖶󾖶󾖶󾖶
 