FlySky Noble NB4+ - 11.4 FCC Statement

Website
66
8.14FirmwareUpdate
8.15FactoryReset
8.16AboutNobleNB4+
󽗉
󽗉󾖷󽗉

1.
󽗋
2.

3.
󾖶󽗉
󾖶
󾖶󾖶
4.


 
󽗉
Note: The model data will be reset after the 󽗉rmware update. Back up the mode
data before you perform 󽗉rmware updating.
WARNING
• UsetheUSBType-Ccableshippedwiththetransmitter.
• DonotunplugtheUSBType-Ccablewhilethe󽗉rmwareis
updating.



󾖶󾖶󾖶󾖶
Note: To avoid errors, do not use this function during operation.
󽗉
