FlySky Noble NB4+ - 8.5 Backlight Adjustment; 8.6 Sound

Website
54
7.6ServosFrequency






FortheClassicVersionReceiver
 
  
• 
 󾖶󽗈
󾖶
 󾖶󾖶󾖶󾖶
FortheEnhancedVersionReceiver
󽗉
󽗉

Note: the conventional servo response speed (PWM frequency) is 50-400 Hz.
The delay of the whole system will be greatly improved when SR and SFR
are selected. Make sure that the adapted servo supports the corresponding
frequency. Otherwise, it may cause the servo not to work properly or even
damage the servo.
Setting All Channels




 

 
 
 
 

 󾖶󾖶󾖶󾖶
Setting All Channels

