FMC Technologies Smith Meter AccuLoad II Programming Workbook

Program Program
Code Function Code Description Entry Code
26 AB06030 Rev. 0.6 5/96
759 Define Delivery Enter: Eight digits in the form of 759
Report three digits for the current line
(000), two digits for the column
number that the data will start at
(00), and the item that will be
printed (000) on the delivery
report.
(e.g., 134, 16, 135) __ __ __, __ __, __ __ __
Note: To delete information from the delivery report move to the entry number field by pressing "ENTER" and enter a zero and press "ENTER"
again.
Note: This code applies to SEQ-05 and above firmware.
760 Additive 1 Address Enter: Three digit communication address 760
to identify this additive if a
Smart Additive System is being used
(e.g., 001) __ __ __
Note: This code applies to SEQ-13 and above firmware.
761 Additive 2 Address Enter: Three digit communication address 761
to identify this additive if a
Smart Additive System is being used
(e.g., 002) __ __ __
Note: This code applies to SEQ-13 and above firmware.
762 Additive 3 Address Enter: Three digit communication address 762
to identify this additive if a
Smart Additive System is being used
(e.g., 003) __ __ __
Note: This code applies to SEQ-13 and above firmware.
763 Additive 4 Address Enter: Three digit communication address 763
to identify this additive if a
Smart Additive System is being used
(e.g., 004) __ __ __
Note: This code applies to SEQ-13 and above firmware.
764 Additive 5 Address Enter: Three digit communication address 764
to identify this additive if a
Smart Additive System is being used
(e.g., 005) __ __ __
Note: This code applies to SEQ-13 and above firmware.
765 Additive 6 Address Enter: Three digit communication address 765
to identify this additive if a
Smart Additive System is being used
(e.g., 006) __ __ __
Note: This code applies to SEQ-13 and above firmware.
766 Additive 7 Address Enter: Three digit communication address 766
to identify this additive if a
Smart Additive System is being used
(e.g., 007) __ __ __
Note: This code applies to SEQ-13 and above firmware.

FMC Technologies Smith Meter AccuLoad II Specifications

General

Brand	FMC Technologies
Model	Smith Meter AccuLoad II
Category	Measuring Instruments
Language	English