FMC Technologies Smith Meter AccuLoad II Programming Workbook

Program
Code Function Code Description Prod 1 Prod 2 Prod 3 Prod 4
34 AB06030 Rev. 0.6 5/96
212 Block Valve Delay Enter: Two (2) digits in
to Open seconds of delay time
(e.g., 05) ___ ___ ___ ___
213-239 Unassigned at Present
240 Protection of Program Enter: "0" for Weights and Measures Mode
Codes 280-289 "1" for Program Mode __ __ __ __
241 Block Valve Security Enter: "0" for No Security
"1" for Security __ __ __ __
242-299 Unassigned at Present
300
Volume Accuracy Directory
301 Minimum Batch Enter: Five (5) digits in
Volume whole units (e.g., up
to 99,999 units) ____________________________
302-339 Unassigned at Present
340 Protection of Program Enter: "0" for Weights and Measures Mode
Codes 380-389 "1" for Program Mode __ __ __ __
341 Flow Rate for Enter: Four (4) digits in whole units
Meter Factor #1 per minute (e.g., 0600) _____ _____ _____ _____
342 Meter Factor #1 Enter: Five (5) digits as one (1) whole
number followed by four (4)
decimals (e.g., 1.0033) _._____ _._____ _._____ _._____
343 Flow Rate for Enter: Four (4) digits in whole units
Meter Factor #2 per minute (e.g., 0400) _____ _____ _____ ______
Note:
If the flow rate is set at zero the AccuLoad II will ignore codes 344 through 348.
344 Meter Factor #2 Enter: Five (5) digits as one (1) whole
number followed by four (4)
decimals (e.g., 1.0040) _._____ _._____ _._____ _._____
345 Flow Rate for Enter: Four (4) digits in whole units
Meter Factor #3 per minute (e.g., 0150) _____ _____ _____ _____
Note:
If the flow rate is set at zero the AccuLoad II will ignore codes 346 through 348.
346 Meter Factor #3 Enter: Five (5) digits as one (1) whole
number followed by four (4)
decimals (e.g., 1.0048) _._____ _._____ _._____ _._____
347 Flow Rate for Enter: Four (4) digits in whole units
Meter Factor #4 per minute (e.g., 0080) _____ _____ _____ _____
Note:
If the flow rate is set at zero the AccuLoad II will ignore code 348.
348 Meter Factor #4 Enter: Five (5) digits as one (1) whole
number followed by four (4)
decimals (e.g., 1.0058) _._____ _._____ _._____ _._____
349 Meter Factor % Enter: Five (5) digits representing
Change/Deg. the meter factor percent change
per degree of unit temperature in
percentage, (e.g., 0.0012) _._____ _._____ _._____ _._____

FMC Technologies Smith Meter AccuLoad II Specifications

General

Brand	FMC Technologies
Model	Smith Meter AccuLoad II
Category	Measuring Instruments
Language	English