Focus FS-T1001 - Lcd Bright; Key Bright; Alarm; Take Number

FS-T1001 Menus
- FS-T1001 Media Recorder
26
LCD BRIGHT
Use to set OLED backlight brightness on FS-T1001: range 1 - 16.
Default is 11.
KEY BRIGHT
Use to set the brightness of the FS-T1001 control keys and scroll
pad: range 1 - 16. Default is 11 (brightest).
ALARM
Enable/disable the FS-T1001 audible alarm. The audible alarm
warns the user of low disk space, power warning or over temp
warning.
Default is ON.
TAKE NUMBER
Sets the second part (4-numeric) of clip names on FS-T1001.
PPPPNNNN_01
Take number
EXAMPLE: FST-0001-01.MP4
Default is set to "0001". Value is user definable and can be set
in the range of 0001 to 9999.
TAKE PREFIX
Sets the first part (4-alphanumeric) of clip names on FS-T1001.
PPPPNNNN_01
Take prefix
EXAMPLE: FST-0001-01.MP4 s a clip name with TAKE
PREFIX = “FST_” and TAKE NUMBER = “0001”
Default is set to "FST-". Value is user definable and can be set as
either upper or lower case characters, numbers (0-9), a dash (-) or
underscore (_).