FS-T1001 Menus
- FS-T1001 Media Recorder
30
DELETE CLIP
This function allows you to delete the current clip from the inserted
SxS media.
To select a clip to delete:
1. Go to the Home menu.
2. Use the Scroll-pad up or down soft buttons (12 or 6
o’clock) to locate clip. The clip’ track number appears in
the menu.
3. Go to UTILITY menu and select DELETE CLIP.
SYSTEM RESET
This function resets the FS-T1001 back to its factory default
settings.
DIAGNOSTIC
This function provides Focus technical support with diagnostic
information in the event that an issue needs troubleshooting.
STATUS
This function shows system status such as unit internal temperature
etc.
VERSION
This function displays the current system firmware version.
To Next Page
Loading...
