C SERIES USER’S MANUAL
34
9.0 Question: why the machines have missed some pave of letter when cutting?
Answer:
1. Check the machine if it presses enough
2. Reinstall the software
3. Chook the head of the knife
4. If the problem is still in existence, please contact with repair center
9.10 Question: how do we maintain the cutter?
Answer:
Foison series cutter all employ upscale oil bearing from Japan, no oil is needed even it
works for a long time.
After operation everyday, clean the dust with soft brush. The glue remaining in engine
base can be cleaned with alcohol. If frequently operated in dusty environment above
two years, please have maintenance technicians clean the dust in machine. If plotting
precision degrades, the maintenance of running parts are desirable (firming and
replacing the abraded parts).
To Next Page
Loading...
